Enter code FALL10 for 10% off sticks & leaf patterns like TrueTimber and Realtree.

Customize and Identify Your Magazines with Pistol Mag Skins

Customize and Identify Your Magazines with Pistol Mag Skins

GunSkins vinyl wraps are easy to apply and offer protection and concealment at the same time. However, they can also be used to customize and identify your pistol magazines. This is a more tactical approach than simply decorating your loadout. If your arsenal consists of different caliber ammo or gun-specific mags, this is a great method of making mag identification simple and awesome at the same time!

Pistol Mag Skins are designed for 9mm and .40 caliber double stack mags, however they will also work on the larger .45 cal magazines. We use them on our personal handguns, including the Glock 17 & 19, Springfield XD, and Sig. With more than 10 unique designs to choose from, it's easy to mix and match just the way you want it!

Each kit comes with pre-cut pieces to make installation a breeze! There are a total of 6 Pistol Mag Skins in each template. That means you can have all of your gun-specific mags wrapped with identical skins for easy identification. Show them off at competitions, share them with a shooting buddy, and never loose track again!

Don't Tread On Me Pistol Mag Skins

Don't Tread On Me is a new design, premiering with Pistol Mag Skins!

Pistol Mag Skins are designed to cover the entire floor plate. The template includes a hole cut-out used to retain disassembly functionality, and it may or may not align with the hole on your mag. Since not all magazines are identical, your mag skin may require custom trimming to ensure functionality. If your magazine doesn't contain any holes on the plate, the entire piece can be installed seamlessly.

As with any GunSkins vinyl wrap, a clean surface is key for a successful installation. Use a gun-specific degreaser to remove all oils and residue. We recommend scrubbing into the recessed areas using a small brush. Lastly, use rubbing alcohol to remove moisture and dry thoroughly before applying the material. Once the vinyl is set in place, hit it with heat and press firmly with your fingers to maximize the adhesion.

Pistol Mag Skins and Slide Cover

The back slide cover matches the accompanying mag skins in each kit.

These are a welcome entry to our growing selection of magazine wraps. As an additional bonus, each Pistol Mag Skin kit also comes with a pre-cut piece that is designed for the back slide plate cover. It's a nice touch that looks great by itself, but also serves as an identifier so you can match your mags with the right pistol.

Even if your gun is already wrapped with an existing Pistol Skin, these accessory Pistol Mag Skins look great when bundled together! They offer the same protection and durability you'd come to expect from GunSkins. They also make great gifts for a special his and hers shooting experience.

9 comments

  • GunSkins: May 11, 2020

    JT, our Pistol Mag Skins won’t cover the entirety of the base plate for the Springfield Hellcat extended magazine, but when centered it still looks nice. Alternatively, you can trim the top and bottom to give it a similar rounded counter to match the Hellcat mag. The mag spring button likely won’t line up, but that piece is optional. We suggest installing it as one single piece since the little round cutout is not cut all the way for that very purpose.

  • JT: May 09, 2020

    Will your magazine baseplate skins fit on a Springfield Hellcat extended magazine?

  • Norberto Lasanta: April 07, 2020

    I like to put my Puerto Rico flag to my carry pistol Taurus slim 9 mili.

  • GunSkins: May 03, 2019

    Ethan, we appreciate your interest in our products. We have a minimum of 100 units to qualify for custom designs.

  • Ethan Ellison: May 02, 2019

    I was wondering if you could do a custom wrap for a XD5-45ACP 3.3 pistol and magazine in the colors of matte red and chrome gold and the magazine mainly gold if not all gold. I will pay extra if it is needed. Please get back to me as soon as possible at eae123456@swbell.net thank you so much

  • GunSkins: November 02, 2017

    While we are always open to suggestions, especially for new and promising camouflage options, we do not print custom kits for single orders.

  • Derik Hanson: November 01, 2017

    I have a design that I wanted to custom make for a skin and I was wondering if you could help me out with a quote. Thanks.

  • GunSkins: March 27, 2017

    Thanks for the interest in our products, Diego. Unfortunately, we don’t offer custom mag skins for single orders.

  • diego C: March 25, 2017

    hello do you customize magz from a 8round to a 16 or 30 round mag.

Leave a comment
x