Spend $20 or more for FREE SHIPPING to USA

GunSkins DIY Camouflage Vinyl Wraps are Perfect for Airsoft

GunSkins DIY Camouflage Vinyl Wraps are Perfect for Airsoft

Hunters and tactical enthusiasts have been wrapping their weapons in GunSkins for many years now. It's a great way to dress up your gun for any occassion and keep it protected from the elements at the same time. There's nothing quite like firing your 1911 at the range, proudly showing off the patriotic Proveil Victory pattern for your buddies to drool over.

A common question we receive from those who don't own or shoot real steel is "Do GunSkins work on airsoft guns?". The answer is a resounding YES! Almost without exception, Airsoft Electric Guns (AEG) and traditional BB guns will look and feel like the real deal. Quite often the moldings, engravings, and sometimes the weight is made to replicate their lethal counterparts.

The internal mechanisms may differ, but the exterior is virtually identical. For this reason it is absolutely necessary for airsoft guns to come installed with an orange tip by manufacturer. This safety tip on the barrel is the most obvious indicator between plastic and real steel.

AR-15 Airsoft Rifle

Proveil Victory is a great option for airsoft!

Airsoft guns are made to look like AR-15s, AK-47, pistols, rifles, shotguns, and more. For this reason all of our kit templates are compatible with any airsoft gun. The application process is going to be the same for a real rifle as it would for an airsoft replica. Since only the surface is covered, all of the pre-cut pieces will lay perfectly in place. 

This is perfect for those who are not able to own firearms or their favorite types of firearms. Some states and entire countries have very strict gun laws, but airsoft is not considered dangerous and very popular for adults and teens alike. We have ties with very competitive airsoft teams located in Europe and Japan. GunSkins on their airsoft guns set them apart!

Concealment is just as important when playing airsoft as it is while hunting. The right camouflage can help or hinder your ability to hide from your opponent. Sometimes entire airsoft teams dress in matching camouflage, and GunSkins can help ensure the guns match the gear.

Airsoft Pistol

BattleWorn Dark Earth makes your airsoft gun look fresh out of a battlefield!

Alternatively, wrapping your airsoft gun is also a great way to stylize and personalize your weapon. We've got a variety of patterns to accommodate the outdoorsman, military enthusiast, and tactical buff. GunSkins are inexpensive and most kits can be installed in an hour or less. Best part of all, they're completely removable and will not tarnish the finish of your gun. 

GunSkins are designed to work for airsoft and bb guns in addition to actual firearms. The kits are so versatile, you can wrap just about anything! If you are an airsoft player, or know someone who is, give them the heads up that GunSkins has them covered!

33 comments

  • GunSkins: September 28, 2020

    Logan, the black ice from Rainbow Six is really cool (pun intended) but unfortunately we do not have any plans for offering anything like this at this time.

  • Logan: September 27, 2020

    Can you do black ice from rainbow six siege for the M4A1

  • GunSkins: September 14, 2020

    Gavin, the SSG10 A1 has a traditional stock so it can be wrapped with our Rifle Skin.

  • Gavin: September 12, 2020

    can you make a white and black one for the SSG10 A1

  • GunSkins: August 31, 2020

    While we don’t produce a kit with precut pieces specifically for the I96 Airsoft Gun, we recommend using our generic uncut sheet, the Large Gear Skin, to wrap your gun with. This kit measures 8″ × 50″ and it requires the user to custom cut, install, and trim to fit any gun.

  • Michael: August 29, 2020

    Can you make a sniper American flag one for the l96 Airsoft gun

  • GunSkins: May 25, 2020

    Reza, since the SR25 is based on the AR-10, it’s a larger platform than the AR-15 and thus our AR-15 Rifle Skin may not fit quite right. We suggest going the generic route and using our Gear Skin to get the job done, which does require custom cutting and trimming to make fit.

  • Reza Kaveh: May 24, 2020

    Hi will the AR-15 gun wraps work on a SR25?

  • GunSkins: May 21, 2020

    Kasey, airsoft guns are virtually identical on the outside, which means that GunSkins will definitely work for your Matrix M4. In fact, our AR-15 Rifle Skin is compatible with the M4 platform, so you’re good to go there!

  • Kasey Findlay: May 20, 2020

    Will a skin fit on my Matrix M4

  • GunSkins: May 18, 2020

    Reese, the G&G Combat Machine is modeled after the AR-15/M4, which means that our AR-15 Rifle Skin will fit it like a glove.

  • Reese Kohlbrecher: May 15, 2020

    Do your gun wraps work for an airsoft station G&G Combat Machine CM16 R8-L AEG?

    https://www.airsoftstation.com/g-g-combat-machine-r8-l-tan-airsoft-rifle/

  • GunSkins: May 14, 2020

    Yes Ralph, you can install on a 1:1 replica of the 1911 pistol. Since you’re only covering the surface, which is virtually identical, there is no issue.

  • Ralph : May 14, 2020

    hi, will your pistol wraps fit a 1:1 1911 airsoft pistol? thanks

  • GunSkins: May 07, 2020

    Teagan, your Wells MB13 is configured with a tactical stock, which requires a custom installation using our Gear Skin. This 8” x 50” has enough material to wrap any gun with but it does take a little more precision with cutting and trimming to make fit.

  • Teagan: May 06, 2020

    i wish you guys can make a sniper camo for my Well MB13 heavyweight airsoft sniper for me. :(

  • GunSkins: April 21, 2020

    Yes Bradley, our AR-15 Rifle Skin will fit the Lancer Tactical GEN2 M4 airsoft rifle. Yes, the pieces are pre-cut. The wonderful thing about GunSkins is you can wrap real steel, airsoft, paintball, or just about any other accessory or object.

  • Bradley Ortega: April 20, 2020

    first, would it fit on a lancer tactical gen 2 m4 and second, are the pieces pre cut or not

  • GunSkins: April 18, 2020

    Reza, for small applications we suggest using the medium Gear Skin to wrap with. You can cut this single sheet into any size piece and trim to fit. Disassembly is not required but some like to wrap in separate pieces. It’s entirely up to you.

  • Reza Kaveh: April 18, 2020

    Hi I have an airsoft Glock 17 Gen 4, I want to just wrap the bottom polymer frame in tan or khaki, do you guys have any wraps like that? Also would if I were to buy one, would I have to disseamble my gun to do it or just wrap up the outside?

Leave a comment
x